2001-2010 Harley-Davidson TCFI III Fuel Injection System Installation And...
download 1. Check the exhaust system. If you can insert a broomstick through the mufflers, you have the equivalent of open drag pipes and auto-tuning will fail. If applicable, read the section about...
View Article2003-2004 Kawasaki VN1600 Power Commander Installation Instructions
download 1 Remove the main seat and the passenger seat. 2 Remove the fuel tank Note: The installation can be done without removing the fuel tank but it may be easier to have it removed 3 To remove the...
View Article2010 Harley Davidson Touring Model Power Commander Installation manual
download 1 Remove the stock seat. 2 Unplug the stock wiring harness from the ECM (Fig. A) . 3 Plug the PCV connectors in-line of the stock ECM and wiring harness (Fig.B). 4 Tuck the PCV to wiring...
View Article2005 Kawasaki ZX6R Power Commander Installation Instructions
download 1. Remove the tail section by removing the undertail and removing the six screws for the tail section. 2 Prop the front of the fuel tank up. 3 Lay the PCIIIin the tail section and route...
View Article1999-2004 Kawasaki 1500 Drifter Power Commander Installation Instructions
download 1 Remove the seat. 2 Remove the left side cover. 3 Remove the speedometer assembly. 4 Unbolt the fuel tank. NOTE: It is not necessary to remove the fuel tank. It does however make the...
View Article2003 Aprilia Tuono Installation Instructions
download 1. Remove the main seat and the passenger seat. 2. Prop the front of the fuel tank in the up position. 3. Route the PCIII harness from the trunk area towards the front of the bike. Route the...
View ArticleHot-Start Kit For Yamaha YZ/ WR 400F
download Blaster Rear Brake Kits 121-01298 • YFS200 Blaster ’88-’98 • This cable will eliminate the stock cable from the handlebar. Cable will go from the rear brake pedal to the caliper. 121-01299 •...
View ArticleCL-1000 CONDOR CYCLE LOADER USER INSTRUCTION MANUAL
download Confirm that the cradle is set in the optimized position setting (See RECOMMENDED CRADLE SETTINGS) for the entering tire and wheel. Adjustment of cradle is crucial for optimum retention....
View ArticleHarley-Davidson Motorcycle Reverse Gear Installation Instructions
download 2.1 Obtain a small tube of Loctite® #262 (red) for use later. 2.2 Drain the transmission oil. 2.3 Remove the clutch adjustment cover (left side). 2.4 Remove rear exhaust header pipe (cross...
View ArticleHarley Davidson BoonDocker Nitrous System Installation MANUAL
download BoonDocker Liquid Nitrous – 1589 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411 web site: www. boon dockers. com – email: info@boon dockers. com Revised 02-27-04 Page 2 of 10 This...
View Article
